View CPH3107_121218.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6077
PNP/NPN Silicon Epitaxial Planar Transistors
CPH3107/3207
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers, and strobes.
Package Dimensions
unit:mm 2150A
[CPH3107/3207]
2.9 0.4 3
0.6
Features
* Adoption of MBIT processes. * High current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). * High allowable power dissipation.
0.05
1.6 2.8
1 1.9
2
0.2
0.6
( ) : PNP
1 : Base 2 : Emitter 3 : Collector SANYO : CPH3
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2x0.8mm)
Conditions
0.7 0.9
Ratings (-)15 (-)15 (-)5 (-)6 (-)9 (-)1.2 0.9 150 -55 to +150
0.2
0.15
Unit V V V A A A W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)12V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)500mA VCE=(-)2V, IC=(-)500mA VCB=(-)10V, f=1MHz 200 (140) 250 (82)46 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz MHz pF Unit A A
Marking : CPH3107 : AG, CPH3207 : CG
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71299TS (KOTO) TA-2031 No.6077-1/5
CPH3107/3207
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Turn-OFF Time Symbol VCE(sat) VBE(sat) Conditions IC=(-)3A, IB=(-)60mA IC=(-)3A, IB=(-)60mA (-)15 (-)15 (-)5 (30)32 (120) 250 (14)10 Ratings min typ (-)100 (-)0.85 max (-)150 (-)1.2 Unit mV V V V V ns ns ns ns
V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO ton tstg tf IC=(-)10A, IC=0 See specified test circuit. See specified test circuit. See specified test circuit.
Switching Time Test Circuit
PW=20s D.C.1% I NPUT I B1 IB 2 RB 50 VR + 100F + 470F RL
OUTPUT
-5V 20IB1=-20IB2=IC=3A (For PNP, the polarity is reversed.)
5V
-5.0
I C - VCE
CPH3107
5.0
I C - VCE
CPH3207
-10
Collector Current, IC - A
-20mA
-3.0
Collector Current, IC - A
-4.0
4.0
100
mA
0m
-40
mA
A
-30mA
30mA
20mA
3.0
10mA
-2.0
-10mA
-90mA -80mA -70mA -60mA -50mA IB=0
-100 -200 -300 -400 -500
2.0
-1.0
1.0
90mA 80mA 70mA 60mA 50mA 40mA
100 200 300 400
0 0
0 0
IB=0
500
Collector-to-Emitter Voltage, VCE - mV
-1.0 -0.9 -0.8
Collector-to-Emitter Voltage, VCE - mV
1.0 0.9 0.8 0.7 0.6
I C - VBE
CPH3107 VCE=-2V
I C - VBE
CPH3207 VCE=2V
Collector Current, IC - A
-0.7
-0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 0 -0.1 -0.2 -0.3 -0.4 -0.5
Collector Current, IC - A
Ta=75C
-25C
25C
Ta=75C
0.5 0.4 0.3 0.2 0.1
-0.6
-0.7
-0.8
-0.9
0 0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
-25C
0.8
25C
0.9
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
No.6077-2/5
CPH3107/3207
1000 7 5
hFE - I C
CPH3107 VCE=-2V
1000 7 5 3 2
hFE - I C
Ta=75C
CPH3207 VCE=2V
Ta=75C
DC Current Gain, hFE
DC Current Gain, hFE
3 2
-25C
-25C
25C
25C
100 7 5 3 2
100 7 5 3 2
10 -0.01
2
3
5
7 -0.1
2
3
5
7 -1.0
2
3
5 7 -10
10 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
5 7 10
Collector Current, IC - A
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5
Collector Current, IC - A CPH3107 VCE=-2V
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5
fT - IC
fT - IC
CPH3207 VCE=2V
Gain Bandwidth Product, fT - MHz
Collector Current, IC - A
1000 7 5
Gain Bandwidth Product, fT - MHz
Collector Current, IC - A
1000 7 5
Cob - VCB
CPH3107 f =1MHz
Cob - VCB
CPH3207 f =1MHz
Output Capacitance, Cob - pF
Output Capacitance, Cob - pF
3 2 100 7 5 3 2 10 7 5 3 2 1.0 -1.0 2 3 5 7 -10 2 3
3 2 100 7 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 2 3
10
Collector-to-Base Voltage, VCB - V
-1000 7 5 3 2 -100 7 5 3 2 -10 7 5 3 2 -1.0 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10
Collector-to-Base Voltage, VCB - V
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10
VCE(sat) - IC
Collector-to-Emitter Saturation Voltage, VCE(sat) - mV CPH3107 IC /IB =20
VCE(sat) - IC
CPH3207 IC /IB =20
Collector-to-Emitter Saturation Voltage, VCE(sat) - mV
75
C
C -25 a= T
25
C
Ta
C 75 C 25 5C =-2
Collector Current, IC - A
Collector Current, IC - A
No.6077-3/5
CPH3107/3207
-1000 7 5 3 2 -100 7 5 3 2 -10 7 5 3 2 -1.0 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10
VCE(sat) - IC
Collector-to-Emitter Saturation Voltage, VCE(sat) - mV
CPH3107 IC /IB =50
Collector-to-Emitter Saturation Voltage, VCE(sat) - mV
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5
VCE(sat) - IC
CPH3207 IC /IB =50
Ta
=-2
C 75 C 25 C 5
75
C -25
C
25
= Ta
C
7 0.1
2
3
5
7 1.0
2
3
5
7 10
Collector Current, IC - A
-10000 7
Collector Current, IC - A
10000 7
VBE(sat) - IC
CPH3107 IC /IB =50
VBE(sat) - IC
CPH3207 IC /IB =50
Base-to-Emitter Saturation Voltage, VBE(sat) - mV
5 3 2
Base-to-Emitter Saturation Voltage, VBE(sat) - mV
5 3 2
-1000 7 5 3 2
-25C
1000 7 5 3 2
Ta=-25C
75C
25C
Ta=75C 25C
-100 -0.01
2
3
5 7 -0.1
2
3
5 7 -1.0
2
3
5 7 -10
100 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
5 7 10
Collector Current, IC - A
2 10 7 5
Collector Current, IC - A
1.2
ASO
ICP IC
PC - Ta
CPH3107/3207
10
10
DC
10
0
s
Collector Current, IC - A
3 2 1.0 7 5 3 2 0.1 7 5 3 2
ms
s
Collector Dissipation, PC - W
1.0
50 0 s
M
0.8
0m
ou
s 1m
nte
op era tio n
do
na
ce
0.6
ram
ic
bo
ard
0.4
(6
00
0.01 0.1
CPH3107/3207 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2x0.8mm)
2 3 5 7 1.0 2 3 5 7 10 2 3 5
mm
2
x0
0.2
.8m
m)
140 160
0
0
20
40
60
80
100
120
Collector-to-Emitter Voltage, VCE - V
Ambient Temperature, Ta - C
No.6077-4/5
CPH3107/3207
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of July, 1999. Specifications and information herein are subject to change without notice.
PS No.6077-5/5

▲Up To Search▲

Price & Availability of CPH3107

	To Download CPH3107 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .